• Hand-push Thermoplastic Road Marking Machine

    #1 Hot Product AC-HPT-I/II/III hand-push thermoplastic screeding road marking machine are the perfect equipment for small road marking project. The screeding marking shoe makes the marking perfectly straight and beautiful.
    Marking width: 100 mm, 150mm, 200 mm, 250 mm, 300 mm (optional)

    Read More
  • Double-cylinder Pre-heater

    #2 Hot Product AC-VHDP-I/II Vertical Hydraulic Double-cylinder Pre-heater is matched with thermoplastic road marking machine, and used for melting thermoplastic paint, improving the construction efficiency.
    Engine: 18HP air-cooled one-cylinder diesel engine
    Paint tank capacity: 225L×2 (at customers' option)

    Read More
  • Driving-type Thermoplastic Road Marking Machine

    #3 Hot Product AC-STM-I/II driving-type thermoplastic screeding road marking machine, small and compact, easy operation. It is the optimal equipment for road line marking in medium or large urban road. Type I: pneumatic screeding flat line marking shoe. Type II: pneumatic screeding flat or convex line marking shoe.

    Read More
  • Big Driving-type Thermoplastic Road Marking Machine

    #4 Hot Product AC-BTSC-I/II is a professional road marking machine with high efficiency, and suitable for marking highway, urban road and local road with large construction square. Type I: pneumatic screeding flat line marking shoe. Type II: pneumatic screeding flat or convex line marking shoe.

    Read More
  • AC-STM Road Marking Machine Working in Kenya

    J. Trevors Logistics Limited is a medium size construction company incorporated in Kenya, purchased a AC-STM small driving-type thermoplastic screeding road marking machine from us in 2010. From then on, we establish a long mutual and beneficial business relationship. Website of J. Trevors: www.jtrevors.com

    Read More
  • AC-HPT Road Marking Machine Working in Bahrain

    Bahrain Motors Company W.L.L purchased one non-automatic marking equipment (AC-HPT), one automatic marking equipment (AC-STM) and two thermoplastic paint preheaters (AC-VHDP) from us to establish a section within their company's road construction division in 2012.

    Read More
  • We are on your side

    No matter where you are, we are on your side. ACE road marking machines have been exported to more than ninety countries and regions such as Australia, France, Russia, the United States, Belarus, Chile, Ecuador, Ghana, India, Indonesia, Iraq, Kenya, Mexico, Morocco, Nigeria, Oman, Papua New Guinea, Philippines, Qatar, Saudi Arabia, Sri Lanka, Suriname, Vietnam, Zambia etc.

    Read More

Thermoplastic
Road Marking Machine

Thermoplastic Road Marking MachineThermoplastic road marking is very popular now. Marking types: Screeding type, extrusion type and spraying type. Machine types by automation degree: marking truck, driving type, self-propelled type and hand-push type.

Cold Solvent
Road Marking Machine

Cold Solvent Road Marking MachineCold paint road marking is very common with a long history. Applicable Paints: cold solvent, cold water based and heated solvent types. Marking types: high-pressure airless type and low-pressure air spray type.

Road Marking Pre-heater
Road Marking Pre-heater

Road Marking Pre-heaterThermoplastic paint pre-heater, melting the thermoplastic paint from powder form to liquid form , keep heating and keep the continuity of the construction work.

AC-BTS Big Driving-type Thermoplastic Spraying Road Marking Machine

Thermoplastic Road Marking Machine, AC-BTS Big Driving-type Thermoplastic Spraying Road Marking MachineAC-BTS Big Driving-type Thermoplastic Spraying Road Marking Machine are low-pressure air spraying thermoplastic road marking machine with high efficiency and flexibility. It can serve long distance and continuous line marking work. The spray thickness is adjustable and not effected by the old marking line.

EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088


Category: ACE Road Marking Machine > Road Marking Equipment > Thermoplastic Road Marking Machine

Technical Data

Model AC-BTS
Engine 37 kW diesel engine
Air compressor 3 m3/min, screw type
Heating Mode Liquefied petroleum gas, conducting oil heating, automatic temperature control
Paint tank capacity 450 L pressure tank
Glass beads bin 120 L
Marking equipment Equipped with double air spray guns
Marking width 100 mm - 500 mm (adjustable)
Marking thickness 1.0 mm - 2.0 mm (adjustable)
Control system Digital intelligent control system
Dimensions (L*W*H) 5100 mm × 2450 mm × 2300 mm
Weight 3800 kg
Optional system Guide warning screen, pre-marking system, and trailer

Features

1.Engine: 37KW water-cooled electrical starting diesel engine with four-cylinder in-line that is environmental protection with low noise. The fuel tank Capacity is 60L.
2.Heating mode:Infrared propane heating, electronic ignition, automatic temperature control and conduction oil heating that can save more than 30% fuel compared with traditional heating mode, and make the heating evener, quicker, more secure and more environmental protection.
3. Driving system: Imported oil pressurized continuously variable speed transmission system (HTS) with an automatic brake device that can freely go ahead, back off and stop. The left and right back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely. Driving speed: 0-22km/h, maximum climbing capacity: 15°.
4. Marking mode: Equipped with double atomized air-auxiliary spray gun with low pressure. The atomized gas's heating oil recycle pump and heat exchanger in this system is able to improve the spray effect.
5. Glass beads spraying system: Equipped with 120L capacity pressurized glass beads bin with windows that can uninterruptedly spray glass beads. Glass beads sprayer can be equipped on the left or right, whose pressure and flow rate and spray width can be freely adjusted to ensure the spraying glass beads firmer, evener and more economical.
6.PLC electronic control: Multi-functional interface; It can be set with various marking types when out of factory according to the requirements of the users. The line type and its length can be freely adjusted to meet the users needs during construction, realizing the full intelligent control. Continuous line and broken line can be finished together in the same program.
7.Paint tank: Equipped with cold rolled, anti-oxidant, steel conduction oil insulated heating tanks with horizontal hydraulic stirring device inside it. The tank's capacity is 300L. The wall of container can be unloaded when cleaning. The emergency valve at the discharging hole closes automatically when the pressure in the tank falls.
8.Air compressor: 3m3/min screw type compressor; the air source storage tank can adjust the pressure and is installed with a safe automatic exhaust device.
9.Warning system: Equipped with double warning lights, whose flicker frequency (sudden flicker frequency) can be freely adjusted. The electronic warning arrow at the back (the flashing direction is adjustable) of the vehicle can improve the safety of road marking operation.
10.Guide rod: The extractable hydraulic guide rod can change directions freely to up, down, left or right.
11. Pre-marking system: Equipped with pre-marking system. It is able to finish the cleaning work mean while the marking operation and the pre-marking work for another line, which greatly improves the efficiency of the road marking construction.
12. Double seats can be overturned and easy to operate and maintain. The operation device and related system can stretch on both sides to meet different customers operation habits.

Pictures

AC-BTS thermoplastic road marking machineAC-BTS thermoplastic road marking machine 01AC-BTS thermoplastic road marking machine 02

Enquiry Form

[Form Enquiry not found!]