Cold Solvent Road Marking Paint

Cold Solvent Road Marking PaintACE Group's cold solvent road marking paints are made of high quality raw material, and its whole production processes are finished by completely automatic production line, absolutely avoid quality defects caused by artificial operation, such as large mixture ratio error, unstable quality, etc. Packaging: 25 kg, steel drum.

EMAIL: This email address is being protected from spambots. You need JavaScript enabled to view it.TEL: +86-371-55635088

Technical Data

Physical Characteristics Standard Result
State in container: No agglomeration, crust, easy to stir uniformly pass
Density (g/cm3): 1.2 min. 1.42
Viscosity: (daubing 4 cups, s) 100 min. 145
Drying time of no sticking to wheel (minute) 15 max. 10
Covering Power: White 95 min. 98
Yellow 80 min. 85
Luminance factor: White 75 min. 81
Yellow 45min. 52
Adhesiveness (By circle method): 4.0 max. 2
Abrasion Resistance (mg, 200r/1000g reduce weight): 40 max. 23.60
Flexibility (mm): 5.0 max. 1.0
Solids content (%) 60 min. 69.9


1. ACE cold-sovlent road marking paint include two colors, white and yellow, is supplied ready for use and is suitable for application to bituminous and concrete roads.
2. It can be successfully applied to airless or air auxiliary spraying equipment.
3. The desired line width and flim thickness can be achieved by varying the spraying gun height, nozzle size, pump pressure and driving speed.
4. It can also be successfully applied with a brush or roller for smaller applications.


Enquiry Form

[Form Enquiry not found!]